The production process of bags
- From Sketch to Screen in 30 Seconds
A client uploads a napkin sketch via WhatsApp. Our AI pattern engine instantly converts the outline into a 3D flat, calculates seam allowances, and nests every panel for maximum hide yield. No human drafter, no waiting.
Die-Less Cutting: The Laser Advantage
Traditional steel rule dies cost USD 200 and take five days to mill. Our 150 W CO₂ laser slices single-layer leather, Cordura®, or recycled PET at 120 mm/s. The beam's kerf is 0.1 mm-half of a steel blade-saving 3 % material and allowing micro-details like 2 mm radius corners impossible with dies.
- Cost Breakdown Chart
• 1,000 bags: steel die amortization USD 0.66 / pc
• 1 bag: laser amortization USD 0.04 / pc
The chart is live-linked; clients drag the quantity slider and watch unit tooling cost collapse.
- Real-Time Video Journey
Watch a 45-second reel:
00:00 AI nesting algorithm flashes across the screen
00:10 Laser head pirouettes, cutting 23 panels in 90 seconds
00:25 Robot arm lifts leather to the single-piece-flow table where one artisan assembles zippers, lining, and handles in 12 minutes-timed with a stopwatch on screen.
- Quality Without Compromise
Every piece gets the same QC sequence as bulk orders: abrasion tester rubs dyed surfaces 10,000 cycles, pull tester yanks straps at 200 N. Results are embedded in a QR code stitched inside the bag.
- Sustainability Bonus
Off-cuts drop into a hopper, shredded, and pelletized for next week's lining fabric-closing the loop on a bag that never needed a mold.
