Choose What You Like From The Appearance Of The Trolley Case

First of all, let’s talk about the trolley case: of course, the trolley must be built-in, and the material must be steel (external trolley and wheels must not be able to adapt to the barbaric loading and unloading of various flights nowadays)! The box body must have a steel frame, and the fabric is best It is rain-proof, and the particle size of the material is better. Because it is more wear-resistant, the wheels must be built-in. (By the way, many boxes are equipped with four wheels that can be turned and can be checked in. The box must not use such wheels, because there are too many exposed on the outside, so it is easy to fall off) The material of the wheel is of course rubber, and the lower the sound when it is pulled on the ground, the better. The zipper is also very important, but it is not necessarily The bigger the better, it depends on the materials and the feel of the pull down! In fact, the box is also very simple, and other things are not very important. It depends on your own preferences for things like suit bags or high-rises!

When buying a suitcase, consumers should first check the appearance of the box, that is, whether the box is upright and whether the corners of the box are symmetrical. You can put the box upright or upside down on the ground to check whether the box is on the ground, not skewed, and Check whether the surface of the box is flat, scratches or cracks, and pay special attention to the four corners of the box shell (top and bottom) to be symmetrical. Open the box, check the mouth of the box, the mouth of the box should be consistent with each other, the gap should be small, the seam should be closed, the hinges should rotate flexibly, without jamming, the Kema (buckle) can be closed, buckled, and opened. It should be firmly adhered, and the textile fabrics should not have skipping or splitting. The handle (mop) is installed firmly and cannot be loosened. The pull rod should be flexible and have a certain strength. The telescopic rod and the fixed rod should be properly matched, and the expansion cannot be too large. After the locking button of the pull rod is pressed, the pull rod should be able to extend and retract smoothly. The running wheel of the box should rotate flexibly, and it is better to choose the running wheel with bearing. When checking the lock of the box, you can combine several sets of numbers at will to test, and the opening and closing are normal.